defenderjack · Tuesday at 15:40

I have a icarsoft car diagnostic tool LR V2.0 but can’t get it to work on my Land Rover discovery 2 TD5.
Can anyone help or give me any advise?
Hoping someone can help me out.

Landmark2 · Tuesday at 18:11

Hi, Don't forget the the TD5 is NOT OBD2 compliant, so if this tool just a generic OBD reader it won't work.
If you put your rough location in your profile, there may be someone near to help.
Griff

sierrafery · Wednesday at 00:01

defenderjack said:
I have a icarsoft car diagnostic tool LR V2.0 but can’t get it to work on my Land Rover discovery 2 TD5.
Can anyone help or give me any advise?
Hoping someone can help me out.

Yes, i can help: buy(or fin somebody with) a dedicated tool which means nanocom or hawkeye... all the rest(your Icarsoft included) are a kind of bad jokes when it comes to EMS...(my bad that i recommended Foxwell at a time then i realised it's unreliable for EMS) ...though Foxwell is the best for other systems e.g SLABS or autobox compared with other cheap tools).

mad85 · Wednesday at 15:41

i had tried a friend's icarsoft and it would only connect to the abs module. if you want to connect to the engine and bcu modules you need a nanocom

frank1093 · Wednesday at 19:27

mad85 said:
i had tried a friend's icarsoft and it would only connect to the abs module. if you want to connect to the engine and bcu modules you need a nanocom

Hello

I bought an icarsoft to identify a three amigos fault, was the shuttle valve which I had to bypass. Fortunately I knew it would not work on othe modules.
I would send it back for a credit if you can, if you make a case with ebay they will probably back you providing the original ad did not outline its limitations.
You would get third party support on here for you case if needed.

defenderjack · 2024-11-07T20:43:58+0000

Landmark2 said:
Hi, Don't forget the the TD5 is NOT OBD2 compliant, so if this tool just a generic OBD reader it won't work.
If you put your rough location in your profile, there may be someone near to help.
Griff

What

Landmark2 said:
Hi, Don't forget the the TD5 is NOT OBD2 compliant, so if this tool just a generic OBD reader it won't work.
If you put your rough location in your profile, there may be someone near to help.
Griff

thank : I didn’t realise . Located between Burnley and Halifax

mad85 · 2024-11-07T21:24:32+0000

Yep, v8 is obd2 compliant td5 isnt

defenderjack

New Member

Landmark2

Well-Known Member

sierrafery

Well-Known Member

mad85

Active Member

frank1093

New Member

defenderjack

New Member

mad85

Active Member

Similar threads