Joechanik · Nov 1, 2020

New here and probably been asked before but thought I'd try

Our disco 2 wouldn't open or start so entered eka code. Bought hawkeye as need something for future and ordered a key of eBay. Chinese with both long codes. Ended up changing the receiver unit .... Old key now works but can't program new one..... It gets to enter long codes .... I emter both on hawkeye but when rechecked it still isn't seeing it. Key bought was described as discovery amd rover 75 type and has a transponder chip inside. Is the key the problem ? What am I doing wrong...... Help appreciated I'm not new to fixing cars just not a landrover expert YET ....

ronsealdeath · Nov 1, 2020

The code is finicky to input, you must include all the symbols if i recall. Mine took 2 attempts.
Not sure about Rover 75 keys

Joechanik · Nov 1, 2020

ronsealdeath said:
The code is finicky to input, you must include all the symbols if i recall. Mine took 2 attempts.
Not sure about Rover 75 keys

Did the whole set including * etc but still didn't recognise a fob

sierrafery · Nov 1, 2020

Cheap chinese keys can have fake codes just for aspect, if it doesnt have an internal code on the PCB send it back and get refund cos you'll not be able to program it whatsoever... happened to me too, if it has code sticker on the PCB compare it with the long code cos it should match the first characters starting from the 2'nd one untill the 7'th , what's certain is that using the short code works only with nanocom

Joechanik · Nov 1, 2020

sierrafery said:
Cheap chinese keys can have fake codes just for aspect, if it doesnt have an internal code on the PCB send them back and get refund cos you'll not be able to program them whatsoever... happened to me too, if it has code sticker on the PCB compare it with the long code cos it should match the first characters starting from the 2'nd one untill the 7'th , what's certain is that using the short code works only with nanocom

View attachment 222405

Thanks

sierrafery said:
Cheap chinese keys can have fake codes just for aspect, if it doesnt have an internal code on the PCB send it back and get refund cos you'll not be able to program it whatsoever... happened to me too, if it has code sticker on the PCB compare it with the long code cos it should match the first characters starting from the 2'nd one untill the 7'th , what's certain is that using the short code works only with nanocom

View attachment 222405

Thanks I'm thinking that may be issue ...... Read a lot before got this far and hoped the cheap keyight work. Any ideas on where to pick up a replacement uaed or new thats reliable ?

sierrafery · Nov 1, 2020

This is the reliable way https://remotekey.co.uk/land-rover-...overy-2-discovery-series-2-year-1999-to-2006/ i dont know how that programming tool works but you can try and it might program your chinese key too then you have a spare

Joechanik · Nov 1, 2020

sierrafery said:
This is the reliable way https://remotekey.co.uk/land-rover-...overy-2-discovery-series-2-year-1999-to-2006/ i dont know how that programming tool works but you can try and it might program your chinese key too then you have a spare

Thanks Sierrafery I'm trying to avoid paying out again now I have the hawkeye for programming. Will update once I know what ended up working

just seen on keyfob code maker ... The 6 digit to long code that codes have to start and end with certain characters depending on market .....Europe U.S. etc so going to try something with the codes they gave.

sierrafery · Nov 1, 2020

Do you have code on the PCB ? , if not i doubt you'll manage to synk it with hawkeye, that fob code generator spreadsheet on the web is not 100% reliable

Joechanik

New Member

ronsealdeath

Sagging Member

Joechanik

New Member

sierrafery

Well-Known Member

Joechanik

New Member

sierrafery

Well-Known Member

Joechanik

New Member

sierrafery

Well-Known Member

Similar threads