B

Barbellbell

New Member

• Friday at 19:27

• #1

What is the correct way to bleed all brakes after renewal of the pipes master cylinder.

 

sierrafery

Well-Known Member

• Friday at 20:28

• #2

It's in the workshop manual

 

Attachments

• 
  1719602871770.png

  100 KB · Views: 9

S

Sheffield

Well-Known Member

• Saturday at 14:00

• #3

I think the Discovery 1 can be difficult to get a good result. Sometimes I have put the system under pressure, using a pressure bleed system, and then have an assistant push the brake peddle up and down on my sayso while I open and close each bleed valve in the old fashioned way. Using the two methods together seems to help getting the last bit of air out.

 

discool

Well-Known Member

• Yesterday at 11:40

• #4

I single person using a one way valve will work with bleeding the D1 brakes to replace the fluid.
Halfords plus loads of shiny ones on eBay

 

Attachments

• 
  IMG_7267.jpeg

  118.8 KB · Views: 7
• 
  IMG_7268.jpeg

  184.8 KB · Views: 5

Last edited: Yesterday at 11:56