Hi all,
I'm sitting here looking at the RAVE diagram for installing the aux power kit and it shows that you have one positive feed going to a relay from inside the boot area and another (switch feed? ) coming from what looks like a spade connector on the main fuseboard. Now my question is would it be possible by taking a wire from this connector on the fuse board (Putting an in-line fuse in of course ) and using the power from the connector to run a second power outlet in the front of the vehicle (Without the feed in the rear), It would only be used for charging phones/ sat nav.

Now on to my next question, The orignal cigar lighter has given up the will to live. There is around 1 volt at the cigar lighter when the ignition is turned on. There is a good 12.5v at between the cigar fuse, so therefore I am guessing the fault lays between the fuse and the cigar lighter any pointers? I seem to think there are two connectors between the fuse board and the cigar lighter, worth checking, If so where?

Part1 is Yes.

Part2 the cigar lighter is fed via the aux supply relay, I believe without checking my diagrams so start at the supply at the rear cigar lighter working back to the aux relay.