vincmad · 2025-07-23T08:52:51+0100

Hi Guys. I searched the forum but i couldn´t find a much threads about 3 door Disco 1

! I am in the middle of the restoration process, outer and inner sills must be replaced (spare parts from froggats and DDS). But i couldn´t find some repair panels for the middle rear corner, where the backseats are. Little hard to describe, i will show the photo. the red circled and blue circled part, i think these are two seperate parts. Remember, its a 3 door disco

! Thank you.

Tipps would be appreciated

, Maybe i have to make my own repair panel??

kevstar · 2025-07-23T12:25:07+0100

vincmad said:
Hi Guys. I searched the forum but i couldn´t find a much threads about 3 door Disco 1 ! I am in the middle of the restoration process, outer and inner sills must be replaced (spare parts from froggats and DDS). But i couldn´t find some repair panels for the middle rear corner, where the backseats are. Little hard to describe, i will show the photo. the red circled and blue circled part, i think these are two seperate parts. Remember, its a 3 door disco ! Thank you.

Tipps would be appreciated , Maybe i have to make my own repair panel??

@resto_d1 should be able to help you.

Look in the projects section.

resto_d1 · 2025-07-23T23:32:50+0100

You do indeed have to make your own - not a very tricky part. I’ll get some pics if you need. It’s a touch different on 3 door. You’ve got 3 parts there really. You have the bottom of arch finisher - this has a hole in that you weld to the back of body mount and is your rear finisher. Once that’s tied in, your flat bit of floor sits on its ledge and makes the top of the sill. The final bit it tying that angled bit to the afore mentioned

resto_d1 · 2025-07-23T23:38:36+0100

vincmad

New Member

Attachments

kevstar

Well-Known Member

resto_d1

Well-Known Member

resto_d1

Well-Known Member

Similar threads