JPSolutions
New Member
I have an interesting problem with dip beam on my D4 commercial.
Drivers side dip beam went off yesterday. I assumed a failed bulb. Passenger side went off today. Two new bulbs fitted and still only got passenger side back.
Further investigation show a good 12.8v at the terminals with no bulb attached, and the bulb tests ok when fitted to the other side. When the bulb is fitted there is no voltage showing on my Meter, but when the bulb is removed the voltage reappears
Any help would be greatly appreciated
Many thanks
Rob
Drivers side dip beam went off yesterday. I assumed a failed bulb. Passenger side went off today. Two new bulbs fitted and still only got passenger side back.
Further investigation show a good 12.8v at the terminals with no bulb attached, and the bulb tests ok when fitted to the other side. When the bulb is fitted there is no voltage showing on my Meter, but when the bulb is removed the voltage reappears
Any help would be greatly appreciated
Many thanks
Rob