R

Rich

Guest

• Nov 16, 2006

• #1

Hi all, with reference to Range Rover's ( Classic's ) there are two
different shaped axle cases:- round with drain plug at bottom, and flat
bottomed with drain to one side, what other differences are there between
these ratios suspension points ect:-

Rich

 

O

Oily

Guest

• Nov 16, 2006

• #2

"Rich" <r3engineering@ntlworldspam.com> wrote in message
news:Kf37h.15901$GX2.1405@newsfe7-gui.ntli.net...
> Hi all, with reference to Range Rover's ( Classic's ) there are two
> different shaped axle cases:- round with drain plug at bottom, and flat
> bottomed with drain to one side, what other differences are there between
> these ratios suspension points ect:-
>
> Rich
>
>
Not a lot, the flat bottomed one is the later one and it may coincide with
the addition of an extra bolt (seven in all) holding the swivel housing to
the axle casing on each side, also to the addition of anti-roll bar
fittings. Ratios of the diffs and suspension points are all the same I
think.

Martin

 

R

Rich

Guest

• Nov 16, 2006

• #3

"Oily" <martinhill100@nospambtconnect.com> wrote in message
news:4rydnaPzH8yaVcHYnZ2dnUVZ8sednZ2d@bt.com...
>
> "Rich" <r3engineering@ntlworldspam.com> wrote in message
> news:Kf37h.15901$GX2.1405@newsfe7-gui.ntli.net...
>> Hi all, with reference to Range Rover's ( Classic's ) there are two
>> different shaped axle cases:- round with drain plug at bottom, and flat
>> bottomed with drain to one side, what other differences are there between
>> these ratios suspension points ect:-
>>
>> Rich
>>
>>
> Not a lot, the flat bottomed one is the later one and it may coincide with
> the addition of an extra bolt (seven in all) holding the swivel housing
> to
> the axle casing on each side, also to the addition of anti-roll bar
> fittings. Ratios of the diffs and suspension points are all the same I
> think.
>
> Martin

Would the diffs be interchangeable and is this the point they changed the
splines on the half shafts ?

Rich

 

G

Geoff

Guest

• Nov 17, 2006

• #4

In article <uQ57h.5824$Fv1.1494@newsfe2-win.ntli.net>,
"Rich" <r3engineering@ntlworldspam.com> wrote:


> Would the diffs be interchangeable and is this the point they changed the
> splines on the half shafts ?

The diffs are the same.

--

Cheers, Geoff.
www.anoraks.uk.net

 

O

Oily

Guest

• Nov 17, 2006

• #5

"Rich" <r3engineering@ntlworldspam.com> wrote in message
news:uQ57h.5824$Fv1.1494@newsfe2-win.ntli.net...
> "Oily" <martinhill100@nospambtconnect.com> wrote in message
> news:4rydnaPzH8yaVcHYnZ2dnUVZ8sednZ2d@bt.com...
> >
> > "Rich" <r3engineering@ntlworldspam.com> wrote in message
> > news:Kf37h.15901$GX2.1405@newsfe7-gui.ntli.net...
> >> Hi all, with reference to Range Rover's ( Classic's ) there are two
> >> different shaped axle cases:- round with drain plug at bottom, and flat
> >> bottomed with drain to one side, what other differences are there
between
> >> these ratios suspension points ect:-
> >>
> >> Rich
> >>
> >>
> > Not a lot, the flat bottomed one is the later one and it may coincide
with
> > the addition of an extra bolt (seven in all) holding the swivel housing
> > to
> > the axle casing on each side, also to the addition of anti-roll bar
> > fittings. Ratios of the diffs and suspension points are all the same I
> > think.
> >
> > Martin
>
> Would the diffs be interchangeable and is this the point they changed the
> splines on the half shafts ?
>
> Rich
>
>
I'd be guessing on the splines but you could always change the halfshafts as
well I suppose.

Martin

 

R

Rich

Guest

• Nov 17, 2006

• #6

"Oily" <martinhill100@nospambtconnect.com> wrote in message
news:_ISdnSrbJa2cA8DYRVnysg@bt.com...
>
> "Rich" <r3engineering@ntlworldspam.com> wrote in message
> news:uQ57h.5824$Fv1.1494@newsfe2-win.ntli.net...
>> "Oily" <martinhill100@nospambtconnect.com> wrote in message
>> news:4rydnaPzH8yaVcHYnZ2dnUVZ8sednZ2d@bt.com...
>> >
>> > "Rich" <r3engineering@ntlworldspam.com> wrote in message
>> > news:Kf37h.15901$GX2.1405@newsfe7-gui.ntli.net...
>> >> Hi all, with reference to Range Rover's ( Classic's ) there are two
>> >> different shaped axle cases:- round with drain plug at bottom, and
>> >> flat
>> >> bottomed with drain to one side, what other differences are there
> between
>> >> these ratios suspension points ect:-
>> >>
>> >> Rich
>> >>
>> >>
>> > Not a lot, the flat bottomed one is the later one and it may coincide
> with
>> > the addition of an extra bolt (seven in all) holding the swivel housing
>> > to
>> > the axle casing on each side, also to the addition of anti-roll bar
>> > fittings. Ratios of the diffs and suspension points are all the same I
>> > think.
>> >
>> > Martin
>>
>> Would the diffs be interchangeable and is this the point they changed the
>> splines on the half shafts ?
>>
>> Rich
>>
>>
> I'd be guessing on the splines but you could always change the halfshafts
> as
> well I suppose.
>
> Martin

Ok thanks for the replies

Rich