H

Hun7

New Member

• Aug 11, 2015

• #1

Hi all,
Just bought a series 3 2.25 diesel 3 bearing engine from what I can make out the engine numbers start with 901 it's coming up as a petrol engine I'm confused can anyone enlighten me.

 

R

reiny

Active Member

• Aug 18, 2015

• #2

A long time ago, many petrol engines were converted to diesel, retaining the petrol engine's block. Yours could well be one of them.

 

J

John S

Well-Known Member

• Sep 2, 2015

• #3

The blocks are the same so its quite possible. Hope its not a Smokey Joe.

 

blue beasty

Leaks an prone to bits dropping off

• Sep 2, 2015

• #4

There is a worry with the 3 bearing lumps that is it might have a petrol crank in it which is cast instead of forged and no where near as strong.

The only way to be sure is drop the sump and see if the crank has a P cast into it. If it has its a petrol crank and will give up under load sooner rather than later.

 

D

Dean Whittam

Member

• Jan 25, 2016

• #5

Hun7 said:

Hi all,
Just bought a series 3 2.25 diesel 3 bearing engine from what I can make out the engine numbers start with 901 it's coming up as a petrol engine I'm confused can anyone enlighten me.

Click to expand...

Common practice by some engine rebuilders blocks are the same as long as it s not a turbo it should be ok .