LordOWar
Well-Known Member
You could probably make them with parts from here http://www.ssldieselparts.co.uk/brass-fittings-c-236.html
Webley1991
Well-Known Member
I was just going to post SSL.
Do you have the steel banjo fittings? Unfortunately I don't know a source for them. I was able to re-use the ones from my Series 3.
As for the plastic pipes, you simply cut these to length, heat the fitting with a heat gun and push the pipe on.
Do you have the steel banjo fittings? Unfortunately I don't know a source for them. I was able to re-use the ones from my Series 3.
As for the plastic pipes, you simply cut these to length, heat the fitting with a heat gun and push the pipe on.
