dag019

Well-Known Member
Garage clearout of parts due to house move, anything that does not sell here will go on ebay, and the free section at the bottom will go to the tip. Open to offers on all items, collection prefered from Warwick area or forum relay, but can package and post at cost.

£50 - Pair of original 110 front brake calipers
IMG_8293.JPG

£50 - Complete defender handbrake mechanism for rod actuuated handbrake. Shortly before removal the expander and adjuster and shoes were replaced. Removed when I fitted an X-Brake conversion.
IMG_8316.JPG

£50 - Pair of galvanised military rear bumperettes for a Series
IMG_8318.JPG IMG_8319.JPG

£40 - 110 towbar to fit pre-td5 crossmember (no bolts) (have same on my 110 can show pics of fitted if required)
IMG_8294.JPG IMG_8313.JPG

£40 - complete airbox
IMG_8297.JPG IMG_8298.JPG

£30 - Brand new Trailing arm to chassis polybush set
IMG_8303.JPG

£25 - New Defender 90/discovery/range rover stainless rear brake piston x4 (bought the wrong ones for my 110)
IMG_8308.JPG

Sold - +5" rear shock mounts for pin shocks
IMG_8310.JPG

£20 - heater fan control switch
IMG_8311.JPG

£15 - Side Step
IMG_8315.JPG

£15 - longer style vent tops
IMG_8300.JPG

£15 - Towing drop plate
IMG_8317.JPG

£10 - braided extended brake pipe
IMG_8307.JPG

£5 - Brand new rubber vent seal x2
IMG_8304.JPG

£10 - Defedner dash Tray
IMG_8292.JPG

SOLD - Pair Hella twin tone horns (replaced with air horn)
IMG_8301.JPG

£10 - Towing/lashing eye and bolts x4
IMG_8309.JPG

£5 - "new" Steering column UJ, test fitted only
IMG_8312.JPG

£5 - Brand new Radius arm to chassis Polybush set
IMG_8302.JPG

All below:
Free to collect or postage at cost before go to the tip

brand new lower rear door seal x2
IMG_8291.JPG

Plastic snorkel wing mount
IMG_8296.JPG

Bonnet prop
IMG_8295.JPG

SOLD - Series rear veiw mirror
IMG_8299.JPG

Misc parts any or all (lock no longer has bolts)
IMG_8314.JPG
 
Last edited:
Could you please check for me what is the distance ( between centers) of the 110 front brake caliper mounting holes.
Thanks
 
Could you please check for me what is the distance ( between centers) of the 110 front brake caliper mounting holes.
Thanks

I will get that measured and let you know. If it helps they were removed from front axle of my '89 110 after I fitted a pair I had refurbed with stainless pistons.
 
Will happily take the twin tone horn off your hands if you want to PM me postage cost etc (UK mainland).:)

And the ball hitch covers and tow bar socket bracket from the misc box if you'd be so kind.:D
 
Many thanks. That equates to a tad over 3.5 inches while the caliper carrier on my kit project has 3 inch centers.
Shall have to keep up the search for a 4 pot caliper to suit.
Cheers.
 

Similar threads