0

09richardk

Member

• Aug 18, 2015

• #1

Hi is the back end of a lt230 transfer box all the same eg. Input gear / bearing carrier and bearing and cover plate as I want to take my overdrive off but don't have the parts so I was going to buy a discovery transfer box and use the parts

Thanks

 

MeatCleaverX86

Active Member

• Aug 21, 2015

• #2

I believe there are difference on the number of teeth on in the input gear and obviously the gear ratios but in terms of mounting hole on the pto cover they are the same

 

L

lynall

Well-Known Member

Full Member

• Aug 22, 2015

• #3

Different teeth count and early lt230 also have narrower gears.
New gears cheap from usual suspects.
Info needed for new gear number of teeth and gear width.

 

jamesmartin

Well-Known Member

• Aug 22, 2015

• #4

richard_paradox said:

I believe there are difference on the number of teeth on in the input gear and obviously the gear ratios but in terms of mounting hole on the pto cover they are the same

Click to expand...

disco box only moved to 28 teeth instead of the 26 as on def after e suffix