G

gary brion

Active Member

• Feb 4, 2021

• #1

Hi All,
I have just sheared the front n/s half-half spines and flange
could anyone please help identify my front diff?
2005 defender 110 hi-cap running standard diffs I presume
Thanks

 

Al2O3

Well-Known Member

Full Member

• Feb 4, 2021

• #2

gary brion said:

Hi All,
I have just sheared the front n/s half-half spines and flange
could anyone please help identify my front diff?
2005 defender 110 hi-cap running standard diffs I presume
Thanks

Click to expand...

Have you broken the diff too?
A website like Paddocks will tell you what will fit your Landy.
https://www.paddockspares.com/tdc000030-front-halfshaft-lh-front-axle-from-la930456.html

 

Last edited: Feb 5, 2021

G

gary brion

Active Member

• Feb 5, 2021

• #3

Cheers, what I have found is n/s front half shaft is turning inside the flange
I have taken off the flange and both splines are wrecked, should I suspect further damage?
or will a new shaft and flange get it fixed,
o/s front splines are in perfect order.

 

Al2O3

Well-Known Member

Full Member

• Feb 5, 2021

• #4

gary brion said:

Cheers, what I have found is n/s front half shaft is turning inside the flange
I have taken off the flange and both splines are wrecked, should I suspect further damage?
or will a new shaft and flange get it fixed,
o/s front splines are in perfect order.

Click to expand...

You should be in a position to just pull the half shaft out and inspect the splines on the diff end.

 

L

lynall

Well-Known Member

Full Member

• Feb 5, 2021

• #5

Bit of stripping to get the shaft out.
Make sure the side you strip is hgher than the other side, that way no diff oil will run out when you remove the stub axle, assuming you have to on the td5?