D

Demios

New Member

• Jan 9, 2013

• #1

Hi,

When I first got my RR I could cycle through the info on the dash I.e: cons1 cons2 range etc, by pushing the button on the end of the indicator stalk. Now it only shows cons1. As I push the button it does turn off after a few pushes like it did before, it is just not changing the data.

2002 l322 hse td6

Thanks

 

D

davidmckenzie

New Member

• Jan 9, 2013

• #2

Hello there,

I had a similer issue ... give this a try ...

With the motor running, press and hold the button at the end of the indicator stock ... it should then bring up a full menu on the main nav screen, select what you wish to display and there we go

 

2.0_hippo

Well-Known Member

• Jan 9, 2013

• #3

has the HSE so might not have the nav screen fitted depending on trim level..


all i would say is try doing a reset by powering down, ie disconnect battery terminals for 10 mins. it might reset something ?

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Jan 10, 2013

• #4

There is a way of selecting the functions required on the stalk through the MID display.....

As the L322 is basically a BMW underneath I remember there was a way to do it on one of my previous E38 7'er, do a goooooooooogle search for it for a BMW, it may turn something up.....