After having new boots fitted to Oulde Bess, 245/75/16. I'm thinking of a suspension lift. Now this is more cosmetic than function. So I'm thinking 2" spacer blocks. If I use these what other mods or parts would I require please. I just think the truck looks too low now with bigger tyres, they're bigger than I expected.
Thanks in advance Matt.

Extended brake hoses, longer dampers, possibly spacers for the gearbox crossmember (depending on which dampers you buy).You'll also need to unclip the abs sensor cables & pull some "slack" through the grommet in the inner wing to make sure they don't get overstretched at full droop. You need to do similar at the rear too.

Paul,
2001 D2 TD5, 187,000 miles & climbing

Not a 100% sure on this but judging from my previous research into this matter I think the 2 inch spacers shouldn't need much more, only the dampers. The geometry of the car stays within its limitations at a 2 inch lift. I could be wrong here but that's my understandings