Afternoon all, hopefully a bit of help and advice to get my D2 going again.
Driving home a while ago the engine cut out and wouldn't start. Being without my Nanocom at the time I tried changing the crank sensor (no change) and then the injector loom (still no change).
Got my Nanocom working (long story of PICNIC problem) and the error code I am getting is "3,5 Driver demand problem 1 (Logged High)".
I have changed the throttle pedal for a known functioning one - still get the same error. If I clear the error and crank her there is a momentary kick as though she's about to fire but then she just reverts to cranking and the error code returns.
Any suggestions for next steps folks?
Thanks in advance, Richy

Apologies, should have added - its a TD5 on an 02 plate....

Better off posting in the dedicated Discovery Forum Richy, you'll have more of a chance of the Disco lads/ladies seeing it. This one is for members projects and 'builds'.....
Link here https://www.landyzone.co.uk/forum/land-rover-discovery.8/

David Leech said:

Better off posting in the dedicated Discovery Forum Richy, you'll have more of a chance of the Disco lads/ladies seeing it. This one is for members projects and 'builds'.....
Link here https://www.landyzone.co.uk/forum/land-rover-discovery.8/

Click to expand...

Thanks David, I'll copy and paste now, thanks.
Richy