S

shuffles

New Member

• May 27, 2014

• #1

can cruise control be fitted to a freelander as easy as it was to my disco 2
can it be just a new steering wheel ,switches etc

 

Epicuser

Ex Freelander Owner

• May 27, 2014

• #2

shuffles said:

can cruise control be fitted to a freelander as easy as it was to my disco 2
can it be just a new steering wheel ,switches etc

Click to expand...

It can on a Freelsnder 1, but not sure about the 2.


Have you asked on Freel2.com - Index

 

T

td4van

Well-Known Member

• May 27, 2014

• #3

On a freelander 2 you need new steering wheel switch and the config updated to reflect cruise control is fitted.

 

H

HippoKen

New Member

• Nov 28, 2017

• #4

I'm looking at adding Cruise control to my Freelander 56 Reg 2.0Td4 automatic, was it just a new steering wheel and the "motorway" switch or more to it

 

gstuart

D3 Grandad

Full Member

• Nov 29, 2017

• #5

hi

i retrofitted cruise on my FL1 TD4 auto

you’ve got to first see if the cruise control ecu plug is under the drivers seat

 

Last edited: Nov 29, 2017

Nodge68

Well-Known Member

• Nov 29, 2017

• #6

As above. Make sure the harness is there, I believe it should. If so, you'll need the CC main switch, a programmed CC ECU and the steering wheel controls. The CC ECU is best got from a scrappy and must be for the TD4. A new ECU would need programming, hence use an old one.

 

tlo

Active Member

• Nov 29, 2017

• #7

am i right in thinking you can retro fit cruse control in an auto but not a manual?

 

gstuart

D3 Grandad

Full Member

• Nov 29, 2017

• #8

tlo said:

am i right in thinking you can retro fit cruse control in an auto but not a manual?

Click to expand...

hi

yes that’s correct , i done a write up concerning how to retrofit the cruise control, will try and find it

https://www.landyzone.co.uk/land-rover/td4-fitting-cruise-control.186205/

 

Last edited: Nov 29, 2017