Hi this is my first post here so please bare with me, i have a 2001 td4 se but it does not have cruise fitted on it and my question is can it easily be retrofitted if so where can i get the bits.
Thanks
Adrian

well you could do a search...

and it would tell you it might work if you have the td4 auto, all you would need are the dash switches, steering controls and ecu. It might work if you plug it all in (as in gstuart), or it might need enabling by a dealer using testbook, or it might not work at all.

if it's a td4 manual, forget it as a bad idea.

best bet (assuming you have the td4 auto) is to slowly accrue the bits and pieces from ebay or similar, but be patient as there a couple of peeps from here after bits too.

good luck though

Just fitted to my 54 plare TD4 auto, got switches from John Craddocks, ECU from Rugbyrover breakers, second hand SCB100211 (SCB100212 is newer ECU, both work) but if you get used ECU, no programming required, plug and play. I wish I'd done it ages ago but took time to find the ECU.