benj
New Member
hi all, td4 manual 2004 facelift, after using the search function i couldnt get any answers. im about to replace the clutch, flywheel and slave cylinder. can anyone tell me does the ird have to be split from the gearbox, if so does the subframe bar that supports the wishbones have to come off. had a quick look and thought i might get away with splitting the ird (but leaving in the area) from the gearbox if i can move the gearbox across enough to get my spanners into the clutch. if it all has to come out does the exhaust downpipe need removing as well.
Another question is there a gasket that needs to be renewed if you split the ird from gearbox as its weaping out from that joint or will it be leaking from the ird seal where the drive shaft enters the ird.
Thanks for any help. trying to keep the cost down as we intend to sell the car soon. thanks ben
Another question is there a gasket that needs to be renewed if you split the ird from gearbox as its weaping out from that joint or will it be leaking from the ird seal where the drive shaft enters the ird.
Thanks for any help. trying to keep the cost down as we intend to sell the car soon. thanks ben