S

Si1979

New Member
Hi all, I’ve just replaced the clutch and slave cylinder on my 2012 freelander 2. I’ve bled over 500 ml through, now I can’t get reverse with the engine on. When I start the engine in reverse, I’m getting a strong burning smell but does reverse back. Any advice would be great
 
Si1979 said:
Hi all, I’ve just replaced the clutch and slave cylinder on my 2012 freelander 2. I’ve bled over 500 ml through, now I can’t get reverse with the engine on. When I start the engine in reverse, I’m getting a strong burning smell but does reverse back. Any advice would be great
Click to expand...
What make of clutch kit did you buy? Cheap and nasty or something like LUK?
I did the clutch in a Freelander 1 and the master cylinder failed when I tried to bleed it. Not sure why but it needed changing too.
 
I got the LUK clutch kit with slave but Iv just found this could this be part of the problem
 

Attachments

  • IMG_1731.jpeg
    IMG_1731.jpeg
    217.9 KB · Views: 51
You must log in or register to reply here.

Similar threads

J
Td4 clutch master cylinder
Replies
0
Views
330
J. glasspool
J
E
Freelander 1 IRD problem
Replies
12
Views
1K
Eric1955
E
M
Land rover series 3 clutch/gearbox issue, I just can't get it in gear
Replies
7
Views
1K
tottot
tottot
Moorhouse2
Series 3 Gearshift Jammed in Neutral on S3
Replies
15
Views
858
tottot
tottot
S
300Tdi clutch
2
Replies
39
Views
3K
Anaconda
A