pitmanzeus

pitmanzeus

New Member
HELP!!! I've got a td4 es 2001 and the slave cylinder packed in put new part in and now itl only select 1st and reverse any help would be hugely appreciated before my hubbie Loses it and torches my motor !
 
what part did you put in ? do you mean the master or slave, you most probly need to bleed it now
 
pitmanzeus said:
HELP!!! I've got a td4 es 2001 and the slave cylinder packed in put new part in and now itl only select 1st and reverse any help would be hugely appreciated before my hubbie Loses it and torches my motor ![/QUO

Does the gear stick go into any other gears, ie. When the engines off? Just thinking one of the gear selector rods could have been forgotten about when refitting the box.
Click to expand...
 
theyd would have had to remove box to fit slave (concentric) if clutch isnt clearing properly it would effect 1st and reverse too, that would be mechanics responsibility as would and damage to box during removal and refit,whats exact symptoms
 
Well hubbie is a mechanic but never worked on landrovers before goes into 1st and reverse no problem just the rest of the gears
 
its not clutch related but linkage or maybe box ,but box id think if it was has had a selector mechanism come adrift inside or similar when removing /refitting box ,its possible but highly unlikely box has unrelated issue thats just shown up
 
it wouldnt necessarily be a hard fix but would require box pulling apart ,and id want to know why good box before it was removed isnt now
 
jamesmartin said:
it wouldnt necessarily be a hard fix but would require box pulling apart ,and id want to know why good box before it was removed isnt now
Click to expand...

would deffo agree with that, as someone who worked in the trade for many years I definitely don't believe in coincidences- "fault has just shown up" is definitely garage speak for we've broke something but want you to pay for it!!
 
kev1nlm said:
would deffo agree with that, as someone who worked in the trade for many years I definitely don't believe in coincidences- "fault has just shown up" is definitely garage speak for we've broke something but want you to pay for it!!
Click to expand...

Totally agree with this.... No such thing as coincidence....

They have broke somfink.
 
Hubbies out taking gearbox out as I speak hopefully nothing was broken first time round , getting desperate for my motor back!!
 
think you might have jumped into removing the box to quickly,
master cylinders fail over a period of time and sometimes bleeding can get the cluthc working ok again for a short time ,

what are you going to do now ?
 
It's definitely the slave cylinder not the master , and he had bled it a couple of times before work started on it first time round as you said solved problem for a little while. , box is now sitting in his workshop waiting to be striped when he's got time
 
You must log in or register to reply here.

Similar threads

xDParis64
Freelander 2 (LR2) Freelander 2 Clutch replacement difficulty?
Replies
4
Views
218
Nodge68
Nodge68
S
Clutch problems please help
Replies
5
Views
979
Si1979
S
D
Freelander 2 front wiper problem
Replies
4
Views
366
Dinosaur Driver
D
T
injector screw broke
Replies
0
Views
227
toto25
T
Y
Freelander 2 (LR2) 2013 SD4 auto rev drop
Replies
8
Views
234
Yampy
Y