Removals01

Active Member
Hi guys I hadn't move my ser 3 for a month got in it to move a trailer and the clutch wouldn't move absolutely solid any ideas?
 
X1. If it had lost pressure it wouldn't be stuck solid. Will it start? I'd try running in neutral and see if it frees up.
 
When you say clutch solid it it that the pedal wont move down? Could be pedal pivot seized,or master cylinder seal breaking up and a bit blocking the fluid outlet,or like mine last year the flexi pipe collapsed inside blocking it.
 
Open the bleed valve, if the pedal won't go down the master cylinder is siezed, if the pedal goes down the master cylinder is OK, pop the slave out, see if it's siezed. If the slave is operating OK then it's in the bellhousing and it's probably a gearbox off job. Good luck!
 

Similar threads