Hi, i have an LSE classic with ABS fitted and i'm trying to get the brakes to work. The pedal is firm but there is very little stopping power unless you pump the brake pedal. The ABS pump didnt seem to be running so i took it apart to clean the filter inside and then re-assembled it. The pump runs when i put 12v across it but it just wont run on the car. I've checked the 3 relays under the passenger seat and they all seem to work ( click when 12v applied and when energised, give continuity across the other 2 pins.
Then this evening, i swapped the two rear-most relays over ( they look identical) and for about 30secs the ABS pump ran?? I opened the bleed screw to try and prime it but then it stopped running and now it wont run. The two relays are both still functioning.
Please can someone point me in the right direction on this as i feel like i'm getting nowhere?
Thanks
Then this evening, i swapped the two rear-most relays over ( they look identical) and for about 30secs the ABS pump ran?? I opened the bleed screw to try and prime it but then it stopped running and now it wont run. The two relays are both still functioning.
Please can someone point me in the right direction on this as i feel like i'm getting nowhere?
Thanks