moonie

New Member

• Mar 6, 2009

• #1

Wanted to check the oil level in me rangie diffs, back one seems a bit empty. What spanner/tool do I need to remove the square plug/bolt?

Ta.

 

Trewey

Cockernee, Pasty munchin bastid.

• Mar 6, 2009

• #2

yer 1/2" rachet.

 

moonie

New Member

• Mar 6, 2009

• #3

Unfortunately this square bolt protudes out - it's not a socket.

 

Trewey

Cockernee, Pasty munchin bastid.

• Mar 6, 2009

• #4

an adjustable spanner or mole grips then!

 

Pikey

Dummy Ejection Facilitator..

• Mar 6, 2009

• #5

Halfords do one with sq holes

 

rustyrhinos

Well-Known Member

• Mar 6, 2009

• #6

Yup, adjustable spanner (and you can get a socket to go onto the square bolt, just rummage around with the sizes, its how we do ours)

 

moonie

New Member

• Mar 6, 2009

• #7

redhand said:

Halfords do one with sq holes

Click to expand...

Sound, cheers!

 

moonie

New Member

• Mar 8, 2009

• #8

rustyrhinos said:

Yup, adjustable spanner (and you can get a socket to go onto the square bolt, just rummage around with the sizes, its how we do ours)

Click to expand...

Good advice, I found a slightly worn 14mm socket (dodecagon not hex) did the trick, so have marked it with tape! Was relieved to see that all the levels are fine.

Thanks!