firedad15

firedad15

New Member
Hi again folks
I have recently got my disco 1, i am changing the mud wheels over to a spare all terrain set i just bought, but cant find a jack and brace, where would it normally be located ?:behindsofa:

It is probably missing, so was thinking of buying a trolley jack, i have seen a couple of 2 tonne trolley jacks would they be upto the job for my disco

Any advice much appreciated thanks
 
its a small red bottle jack that your looking for. My handles were stored under the back seat.
 
That won't lift high enough I wouldn't think

I picked a hi lift up yesterday mint piece of kit and not that expensive look at paddock
 
also looking at axle stands and wheels brace,
what weight do axle stands need to take, and what size is wheel nut,

sorry to be a dumb ass :behindsofa:
 
27mm nuts

2tonne trolley jack is fine as are 2 tonne axle stands. Though I bought 3tonnes for the extra height and stability.

I've had an Halfords 2tonne car jack for years. never failed to lift all my landies disco and defenders.

Remember you're only lifting 1 corner of the vehicle not the whole thing.
 
You must log in or register to reply here.

Similar threads

hawky666
How to determin correct offset needed with wider arches??
Replies
4
Views
925
Ollie_Mif
O
N
Discovery 4 Front Wheel Hub/Bearing Change Advice
Replies
15
Views
3K
frostythor
frostythor
PurityVendetta
D2 TD5 throttle issue
Replies
18
Views
3K
PurityVendetta
PurityVendetta
ruplaw
Disco 4 (LR4) and its (my!) limitations
Replies
6
Views
1K
Nodge68
Nodge68
Erdapfel
Freelander 1 Freelander 1 absolute off-road capability limit – have I reached it?
2
Replies
23
Views
5K
GrumpyGel
GrumpyGel