S

sprie

Active Member
I bought this on ebay, partly as i needed a hazard switch. I can't find anything similar in any photos on the web. I can't work out if/where i could place this bracket in my dash - is there somewhere it can fit?
 

Attachments

  • bracket.png
    bracket.png
    1.1 MB · Views: 58
It fits between the shelf and dash about in the middle with the switches angled towards the driver but I forget exactly how.
 
sprie said:
I bought this on ebay, partly as i needed a hazard switch. I can't find anything similar in any photos on the web. I can't work out if/where i could place this bracket in my dash - is there somewhere it can fit?
Click to expand...
Hi Sprie. Unfortunately I’m not well versed enough to help wire it in but I’ve attached some photos of mine to help you locate the correct position. Hope this helps.
 

Attachments

  • IMG_3539.jpeg
    IMG_3539.jpeg
    226.2 KB · Views: 51
  • IMG_3538.jpeg
    IMG_3538.jpeg
    204.7 KB · Views: 46
  • IMG_3537.jpeg
    IMG_3537.jpeg
    228.8 KB · Views: 51
I think @sprie's only got one side of it. There's also supposed to be a bit of vac formed plastic that covers the join at the front.
 
There's quite a bit more to it, there a relay for the brake lights ,a second indicator relay, and a good chunk of wiring loom. As well as the other side of the panel and the plastic...
 
We took one out of a mates series three many years ago. I couldn’t believe the amount of wires crammed behind it for a couple of switches. Can’t remember where they all went but very likely to a handy multi pin plug.
 
You must log in or register to reply here.

Similar threads

S
Reverse switch
Replies
2
Views
349
Wildefalcon
W
L
Series 3 Dashboard
Replies
4
Views
835
Bobsticle
Bobsticle
D
Series 3 Series 3 headlining
Replies
0
Views
463
Demelza
D
S
Alternator tensioner bracket position
Replies
3
Views
464
sprie
S
S
seat box question
Replies
1
Views
234
kermit_rr
kermit_rr