dave125

Member

• Oct 10, 2011

• #1

I have see loads on this forum about this subject but i still cant work out if i need to do it or not or if i do need to do it where to get the kit from, i have a 1994 d90 300tdi ending chassis number MA952159. hope someone can help

 

jamesmartin

Well-Known Member

• Oct 10, 2011

• #2

you just need to ensure guides are on crank sprocket and not tensioner pulley

 

Last edited: Oct 10, 2011

dave125

Member

• Oct 10, 2011

• #3

ok thanks i will check in the morning... I take it that my chassis number is one of the affected then?

 

jamesmartin

Well-Known Member

• Oct 10, 2011

• #4

ive no idea but they changed guides from tensioner to crank sprocket as belts were getting damaged edge eventually failure ,its allways better to steer belts with driver pulley.to begin with they had other issues with alignment issues with belts but they would have long been fixed ,but i still see tensioners and crank sprockets that need changing even if belts fine

 

dave125

Member

• Oct 10, 2011

• #5

ok yeh that makes more sense thanks for the help