hello guys,
im torn about whether to use standard lifters or rhoads lifters when i replace my cam with a crower for more torque.
my concern is about the noise generated at idle with the rhoads lifters, does or has anybody had experience of this valve train noise and if so exactly how bad does it sound.
also ive read that theres another alternative by the way of isky lifters, which work on the same principle as the rhoads but are far less noisy, anybody heard of these and know where you can buy them?
thanx in advance.
4.6 p38 with mods.
im torn about whether to use standard lifters or rhoads lifters when i replace my cam with a crower for more torque.
my concern is about the noise generated at idle with the rhoads lifters, does or has anybody had experience of this valve train noise and if so exactly how bad does it sound.
also ive read that theres another alternative by the way of isky lifters, which work on the same principle as the rhoads but are far less noisy, anybody heard of these and know where you can buy them?
thanx in advance.
4.6 p38 with mods.
