R

Remoulds

New Member

• Jan 18, 2011

• #1

Hi Gents

I am going to attempt to change the pads and discs on my early 53 freelander. Advice Please. If possible a link or pages from manual would be a help.

Many Thanks

Matt

 

mick 1986

Well-Known Member

• Jan 18, 2011

• #2

It's a piece of cake mate. All you need after the wheel is off, is a 12mm spanner and a 15mm spanner a cross point screwdriver and a cable tie. It took me about 45 mins all in.

 

chromiumuk

Well-Known Member

• Jan 18, 2011

• #3

mick 1986 said:

It's a piece of cake mate. All you need after the wheel is off, is a 12mm spanner and a 15mm spanner a cross point screwdriver and a cable tie. It took me about 45 mins all in.

Click to expand...

Wot he says, one of the easier jobs you can do.

 

M

Mark2

Active Member

• Jan 18, 2011

• #4

Yep, one of the easiest jobs you can do

Just changed mine at the weekend.

A good time to lube up the sliding pins and pad shims with Copperslip,
also check caliper piston seal etc.