Bob_In_Spain
Member
Hi to all,
I’ll keep this as short and factual as I can!
HSE 2002 TD6
Exiting audio consisted of,
Early slimline LCD display with small black plug connector marked ‘amp’.
Single CD player mounted above display with single black cable (fibre optic?) and a large black plug with NO white or blue small plugs attached (although the pins are present on the CD unit itself.
Multi CD unit in the glove box with three pin (cable) connection and again a single black cable (fibre optic?) attached.
Boot amplifier is a Lear XQK 000030 unit with three multi wire connectors so I’m assuming that is a DSP unit (also large sub woofer in the same area)
LCD display mostly blacked out and although it turned on and off no other functions seemed to work.
Decided to fit a new Android head unit, so removed old CD unit, display unit and glovebox unit and fitted new head unit using the new plug connectors supplied. All good….everything works, bus, steering wheel controls the lot….however there seemed to be no facility to connect the small black plug marked amp on the new unit……it’s just left disconnected. There is also no sound from any of the speakers….nothing at all!
I assume that the DSP isn’t either getting power and/or a signal from the new head unit and that I (obviously) need to do something with the small black amp plug….but what?!
Can anyone point me in the right direction please? Fuses all checked and good, no apparent moisture issues etc. I’ve scoured the internet but all of the head units I’ve found are the full screen type….not the X5 throwback (I assume) I have.
Photos can be supplied if needed…..many thanks in anticipation!
I’ll keep this as short and factual as I can!
HSE 2002 TD6
Exiting audio consisted of,
Early slimline LCD display with small black plug connector marked ‘amp’.
Single CD player mounted above display with single black cable (fibre optic?) and a large black plug with NO white or blue small plugs attached (although the pins are present on the CD unit itself.
Multi CD unit in the glove box with three pin (cable) connection and again a single black cable (fibre optic?) attached.
Boot amplifier is a Lear XQK 000030 unit with three multi wire connectors so I’m assuming that is a DSP unit (also large sub woofer in the same area)
LCD display mostly blacked out and although it turned on and off no other functions seemed to work.
Decided to fit a new Android head unit, so removed old CD unit, display unit and glovebox unit and fitted new head unit using the new plug connectors supplied. All good….everything works, bus, steering wheel controls the lot….however there seemed to be no facility to connect the small black plug marked amp on the new unit……it’s just left disconnected. There is also no sound from any of the speakers….nothing at all!
I assume that the DSP isn’t either getting power and/or a signal from the new head unit and that I (obviously) need to do something with the small black amp plug….but what?!
Can anyone point me in the right direction please? Fuses all checked and good, no apparent moisture issues etc. I’ve scoured the internet but all of the head units I’ve found are the full screen type….not the X5 throwback (I assume) I have.
Photos can be supplied if needed…..many thanks in anticipation!
