Wazzajnr

Well-Known Member

• Oct 31, 2019

• #1

Anyone got any tips on how to get them out without removing the whole hub to the press?
Battered them for a while but zero movement!

 

Attachments

• 
  IMG_20191031_115235.jpg

  328.4 KB · Views: 157

biketeacherdave

Well-Known Member

• Oct 31, 2019

• #2

No remove the whole hub trust me it's much easier

 

Wazzajnr

Well-Known Member

• Oct 31, 2019

• #3

What size socket is the driveshaft nut? It's a weird star shaped nut.

 

Attachments

• 
  IMG_20191031_125046.jpg

  360.1 KB · Views: 97

Wazzajnr

Well-Known Member

• Oct 31, 2019

• #4

Got one of the buggers out.
I'll have to make a temporary repair to the cv boot until I have more time to replace it.

 

Attachments

• 
  IMG_20191031_130252.jpg

  230.6 KB · Views: 115

M

myfirstl322

Well-Known Member

• Oct 31, 2019

• #5

Wazzajnr said:

Got one of the buggers out.
I'll have to make a temporary repair to the cv boot until I have more time to replace it.

Click to expand...

LR I believe have a slide hammer type extractor.

When I did mine I used a combination of slim chisels and a large punch and sledge hammer on the top, taking care around the CV boot of course.

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Oct 31, 2019

• #6

I battered mine like I was jacking off to hardcore porn....after a few moments it finally relented and fell out!

 

T

tomcat59alan

Well-Known Member

• Oct 31, 2019

• #7

Saint.V8 said:

I battered mine like I was jacking off to hardcore porn....after a few moments it finally relented and fell out!

Click to expand...

Oh Ant! You've just admitted you only last a few moments, mind you its enough to fill a pram.

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Oct 31, 2019

• #8

tomcat59alan said:

Oh Ant! You've just admitted you only last a few moments, mind you its enough to fill a pram.

Click to expand...

....twice....

 

T

tomcat59alan

Well-Known Member

• Oct 31, 2019

• #9

Saint.V8 said:

....twice....

Click to expand...

That your admitting to.

 

Wazzajnr

Well-Known Member

• Oct 31, 2019

• #10

One side finished, just need to find a socket to fit the drive shaft nut so I can take the hub off to do the other side. I'll also get some new cv gaitors and might do wheel bearings whilst it's in bits. It'll have to wait a week or two though now.

 

W

Willos

Active Member

• Nov 1, 2019

• #11

36mm 12 point socket if i remember

 

Wazzajnr

Well-Known Member

• Nov 1, 2019

• #12

Willos said:

36mm 12 point socket if i remember

Click to expand...

Thanks, I'll try and find one before I do the drivers side.