R

Roger 47

Member

• Mar 30, 2012

• #1

Hi to all

Is their a simple check to see if the blend motors are operating ok. I have, to my knowledge no issue at present. If they do go faulty does it show as a defect on the screen.
Thanks Roger

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Mar 30, 2012

• #2

If the temp changes and the distribution changes they work....

Usually if they feck up, you will get the Testbook symbol on the HEVAC display

 

Speedex750

Member

• Mar 30, 2012

• #3

On a long journey when I get bored I 'exercise' the blend motors by turning the temperature right up then right down and then gradually work along the various vent buttons. I figure that sticking with one standard setting will encourage the motors and the flaps they drive to stick as well.