In the how to section there is a thread on doing the EGR blanking mod using a 22mm copper stop end, Just wondering if anyone has tried it and does it work? Or should I look to buy the replacement EGR blanking mod that others have used, as im of work at the moment thought I would put my time to some use.......
thequeenscheese
Well-Known Member
I've used it and deffo made a difference to mine, I didn't bother ditching the valve just took the pipe of and blanked the ends, might ditch the valve altogether tho at some point..
Get a BG fue/enginel service just had foot down run what a difference its made to the revs and pickup..
Get a BG fue/enginel service just had foot down run what a difference its made to the revs and pickup..
thequeenscheese
Well-Known Member
EGR blanking plate KIT MG ZR ZS Rover 220 25 420 45 Freelander Streetwise Honda | eBay
Basically I got this, its self explanatory connect the hoses blank the valve off( remove pipe and valve or just top pipe) block the vacume tube that's it done..
Basically I got this, its self explanatory connect the hoses blank the valve off( remove pipe and valve or just top pipe) block the vacume tube that's it done..
