Hi, I've had a number of intermittent faults on my P38 DHSE which suggest there is a problem with the becm.
Faults have been:
Traction failure warning on display (most common)
Air suspension not working (about 3 times in 6 months)
Indicator lights stuck on (only done this once)
auto gearbox selecter display showing wrong gear (showed reverse when in drive) (again only done this once)
Radio lost code (done this twice)
Gave all signs of a flat battery (nothing electrical worked at all) only done this once.
All the above have been put right by locking/unlocking the car, sometimes with the key in door, then all is then back to normal.
Am I right with thinking this is the BECM at fault, and any ideas on whether its a fixable fault, or replace the BECM?
Any suggestions welcome!
thanks
Phil
Faults have been:
Traction failure warning on display (most common)
Air suspension not working (about 3 times in 6 months)
Indicator lights stuck on (only done this once)
auto gearbox selecter display showing wrong gear (showed reverse when in drive) (again only done this once)
Radio lost code (done this twice)
Gave all signs of a flat battery (nothing electrical worked at all) only done this once.
All the above have been put right by locking/unlocking the car, sometimes with the key in door, then all is then back to normal.
Am I right with thinking this is the BECM at fault, and any ideas on whether its a fixable fault, or replace the BECM?
Any suggestions welcome!
thanks
Phil