Hi all, I have recently fitted some +1" hd bearmach springs with terrafirma shocks to my 300tdi defender and its now leaning slightly to the off side, I've measured all the springs from top to bottom of brackets and the off side front and rear are 10mm shorter, are the bearmachs handed cos there was no mention of it in the boxes just fronts and rears, I know what's coming but am hoping for a miracle quick fix please

Just fitted Bearmach BA2101 & BA2103 to my 90 and unlike the Scorpion units they replaced, they are not handed. I measured the pairs before fitting and they were identical.
You say you have measured them and there is a difference of 10mm but was that before or after fitting?

Hi litch, after fitting, I like you checked them before fitting and they were the same but other than swap them over I'm a bit stuck, everything else is ok trailing arms etc so I'm stumped