squidly · Apr 25, 2011

Have D1 1997 ES 5 door.

As a consequence of the below problem, I checked out the bearings.

Just finished the wheel bearings in the front. Nipped them up, they are fine.

GOT a hell of a lot of play in N/s of the disco.
If I really give the wheels a rocking ( I am not a physically small person ) I can hear some clicking and clonking.. and movement that makes me fear driving it...

Driving, I can hear some mechanical clicking... with engine travelling in Neutral and without..

Any Ideas?

Thought about getting a complete diff and swapping it out.

Any advice brilliant...

Thanks guys..

Pikey · Apr 25, 2011

Sounds more like CV's to me. but then there is an awful lot of play in the disco front end. check ball joints and even the dust plate on the brake disc. eliminate everything else before suspecting the worst.

jamesmartin · Apr 25, 2011

is play in swivel brgs or wheel brgs ,for both you are looking at removing free play without adding preload

thebiglad · Apr 25, 2011

squidly said:
Have D1 1997 ES 5 door.

As a consequence of the below problem, I checked out the bearings.

Just finished the wheel bearings in the front. Nipped them up, they are fine.

GOT a hell of a lot of play in N/s of the disco.
If I really give the wheels a rocking ( I am not a physically small person ) I can hear some clicking and clonking.. and movement that makes me fear driving it...

Driving, I can hear some mechanical clicking... with engine travelling in Neutral and without..

Any Ideas?

Thought about getting a complete diff and swapping it out.

Any advice brilliant...

Thanks guys..

I would be checking for wear in the swivel bearings. To do this you need the wheel off the floor. Grab it at 12 and 6 o' clock and check for play. If there is any, it's swivel bearings.

These are shimmed so you may be lucky and just need to remove some shims to take out the play. Because the parts are so cheap I would have some new swivel bearings and pins in stock before you start the job.

squidly · Apr 27, 2011

Thanks for the responses people, I will consider these carefully and get them into action.

I just tightened a pan hard rod too... it made a diffrence.

Hippo · Apr 27, 2011

Wheels are round. They is ment ta turn.

squidly

New Member

Pikey

Dummy Ejection Facilitator..

jamesmartin

Well-Known Member

thebiglad

Well-Known Member

squidly

New Member

Hippo

Lord Hippo

Similar threads