MikeHe

Member

• Sep 16, 2020

• #1

Does anyone know what these two lovely codes mean.

BCM
2.1. B1B02-28 Low frequency coil.
2.2. B1C57-14 Unused relay drive.

I've not found anything of use on them and it's the last time faults in the car to fix now.

 

sierrafery

Well-Known Member

• Sep 17, 2020

• #2

Did you clear them and they keep coming back? if they were real and current the vehicle would not start...btw what modell and year is the disco ? did you try a hard reset ?

 

Last edited: Sep 17, 2020

MikeHe

Member

• Sep 17, 2020

• #3

It's a 2006 D3 SE TDV6 and yeah cleared them 4 times now.

I'm afraid to do a hard reset as I'm sure that the last time I did it that caused my transfer case to loose it's calibration.

 

sierrafery

Well-Known Member

• Sep 17, 2020

• #4

It's a quite common "bug" on D3s and RRSs, if the vehicle is starting and running in most cases a hard reset was the cure cos if it was something with the passive coil or relay the vehicle would not start but if you've had bad experience with the hard reset i have no other ideea

 

MikeHe

Member

• Sep 17, 2020

• #5

I will just leave them on the ECU, I'm happy it all works so that's good enough for me.

Thanks for the help.

 

Nodge68

Well-Known Member

• Sep 17, 2020

• #6

The D3 throws codes, just by starting it.

 

andyschleckscheshirecat

Well-Known Member

Full Member

• Sep 19, 2020

• #7

I have the B1C57 code as well

Difficult to clear by all accounts but doesn't cause any malfunction as far as I am aware

I am starting to forgot about mine now