Chrislowns

New Member
Hi you lovely and probably frustrated fellow Land Rover peeps.
So after having no end of issues resolved on my Disco 4 I now have another .

The grear selector is stuck in reverse and is also in the raised position.
After reading other posts I tried the manual override to neutral and release the hand brake but that’s not working either .

Help is need please 🙏🏻
 
Hi you lovely and probably frustrated fellow Land Rover peeps.
So after having no end of issues resolved on my Disco 4 I now have another .

The grear selector is stuck in reverse and is also in the raised position.
After reading other posts I tried the manual override to neutral and release the hand brake but that’s not working either .

Help is need please 🙏🏻
Welcome to the Forum.Hopefully someone like @gstuart will be along in a mo to help you!
 
Thank you that would be awesome. Little update, I managed to get into neutral using the override but the battery is way low to even try
So many of our type of vehicle respond badly to batts that are low on power, even the TD5 will crank quite happily but not start unless it has sufficient juice.
 
So many of our type of vehicle respond badly to batts that are low on power, even the TD5 will crank quite happily but not start unless it has sufficient juice.
The juice is going in , let’s see how that fairs .
I’ll let you know it goes.
If not the battery, I researched it could be the gear selector module itself, or even the parking light switch … just hope it’s not the gear box itself .
Love my landy and hate it too . This is life hahaha
 
So, problem solved ! I bought a rotary gear selector module and the wife swapped out the old with the new whilst I was at work after following YouTube videos. Simple plug in and go.. Mission successful and we’re happy again .
Quote from Anchorman re Land Rover ..’60% of the time it works every time ‘😂
 

Similar threads