S

Sid65

Member
Hi i have a 200tdi defender and am thinking of fitting anti roll bars but i do not seem to have and brackets on my axles to fit the bars too should i wield some brackets on cheers in advance
 
just front axle or both, you van buy kits for such that bolt on or i have welded brakets off another axle before both work + you may need to weld brackets on chassis
 
If not allready done fit new springs and dampers and see how it drives before antiroll bars.
 
thanks for the advise i have a new galv chassis that have them fitted and have found the brackets i need to weild to chassis i have put new shocks and springs on as well
 
Would there be a massive difference in handling if I was to fit softer 110 csw springs to my 110 van?

Wouldn't mind it being abit softer, but don't want my door handles scrapng the floor on corners..
 
you can use softer springs with roll bars fitted ,most people dont remove them ,but if you had dedicated off road vehicle then remove them but if its your transport as well then depends on what handling you want
 
My Def 110 does not have it and I am planning on getting them for the front and rear. I have a 3" Extra heavy duty OME springs front and back and also the new OME nitrosport shocks. Use the 110 75% on road and 25% offroad over the weekends.Will this make a huge diff by adding the roll bars?
 
The anti roll bars will negate the extra articulation on your +3 springs as they will restrict the axle movement but I have them on my 110 CSW and noticed a difference between it and my prev 110 hard top. Still good off road but better handling on road, would be worth replacing all bushes as well If you haven't already. Also wide angle props and +3 brake lines if you haven't already got them
 
Last edited:
chezvegas said:
The anti roll bars will negate the extra articulation on your +3 springs as they will restrict the axle movement but I have them on my 110 CSW and noticed a difference between it and my prev 110 hard top. Still good off road but better handling on road, would be worth replacing all bushes as well If you haven't already. Also wide angle props and +3 brake lines if you haven't already got them
Click to expand...

Thanks Mate! Need to get the +3 bake lines
 
You must log in or register to reply here.

Similar threads

andyjack
Help with suspension
Replies
3
Views
584
miktdish
miktdish
J
Drivers side front knock
Replies
7
Views
489
Anaconda
A
S
Anti roll bar bracket postions
Replies
4
Views
733
Sam RRC
S
C
Which driving/spotlights?
Replies
4
Views
220
Knappster
Knappster
Teaboy2
90 def. hard top water leaks
Replies
16
Views
482
dag019
dag019