Does anyone know the thickness of alpine light glass and the roof skin.
I replaced a seal awhile back with a Britpart one it has never been right so looking to buy some from a different source.
https://www.coh-baines.co.uk/products/IRS-0634-W{47}S-%2d-EPDM-Claytonrite-type-profile.html
IRS 0634 W/S - Sold in metres


Black EPDM Claytonrite type profile. Suitable for up to 4.75mm glass & 0.8-1.6mm panel section. 7mm clearance between glass and panel. Minimum bend radius 64mm.

Requires a filling / locking strip - use either LF1B (black) or PT 02 (chrome)

Tools are also available to insert the filling strip - Use A8372 - Claytonrite type tool for rubber fillers or B5406/1 - Claylastic type tool for plastic / PVC fillers.

Suggested IRS 0634 W/S Uses


Landrover Rear Window Glass Seal, Bus Window Seal. Used as glazing seal in classic car, bus, caravan, air, rail, marine and other industries.
Need to know measurements before buying as diferent glass thicknesses and panel thicknesses available.

it might be different to a wind screen but they are around 6mm - the only reason I know this is we do cut front screens for customers out of 6.4mm laminated glass - they are always a little tight going in but as this is a stock item they are much cheaper and do the jo. The only thing making me think the alpine glass is less is the sheer bend on it! sorry carnt give any more info

They're not as thick as 6mm. I'll try and remember to measure some that I've got in my workshop tomorrow.

4mm

Thanks for that.