HARRISON 111

New Member

• Dec 17, 2009

• #1

Hi lads before i change the battery and set the alarm off ! does anyone know how to disable it it maybe something simple like keeping key in the ignition but want to check Thanks

 

tommo138

New Member

• Dec 17, 2009

• #2

i think theres a certain procedure in the owners handbook that tells you how to do it without setting it off, i think you have put the key in the ignition then remove it and then you have something like 17 seconds to disconnect the battery terminals.

 

rewmer

Well-Known Member

• Dec 17, 2009

• #3

Turn on ignition to II, then remove battery within 17 seconds of turning the ignition off.

 

Cavey_P38

Well-Known Member

Full Member

• Dec 17, 2009

• #4

Damn
wished i had posted and asked

i changed mine 3 days ago with jump leads hooked to the battery leads to keep power as i dont beliuve i have the eka code for the vehicle

 

rewmer

Well-Known Member

• Dec 18, 2009

• #5

YOu can get your EKA code from a main dealer, just take your logbook into the service department, shouldnt cost you a penny.

 

HARRISON 111

New Member

• Dec 18, 2009

• #6

Thanks for that lads i knew it was best to check first. I bought a hand book now thanks again