welshsteve

Member

• Sep 26, 2016

• #1

Hi All, I'm having a bit of an issue with my EAS pump. basically it is not running when I start the car or drive it.
If I connect the free version of the eas software I can run the pump and it raises the car, the pump is a little lazy but does run. no errors are showing other than the usuall "the vehicle has moved" so I am a bit lost what is amiss.
Any suggestions please?

 

wammers

No longer with us, RIP

Donater

• Sep 26, 2016

• #2

Look in the Tech Archive for my EAS post. Left had top of Range Rover page. Follow instructions in that to work through various causes and checks. Sounds like the thermal switch has failed.

 

welshsteve

Member

• Sep 26, 2016

• #3

Cheers Wammers will do, would the pump run on command if the thermal switch had failed?

 

welshsteve

Member

• Sep 26, 2016

• #4

Just read you eas post, will check for continuity and go from there.

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

Full Member

• Sep 26, 2016

• #5

welshsteve said:

Cheers Wammers will do, would the pump run on command if the thermal switch had failed?

Click to expand...

Yes.

 

welshsteve

Member

• Sep 26, 2016

• #6

Thermo switch is good so not that.

 

pwood999

Well-Known Member

Full Member

• Sep 26, 2016

• #7

Mine was randomly not running. Fault was dry joint on wires to brushes inside the motor.