UpandOver
Well-Known Member
Help!
I’m slowly pulling all of my hair out with this one !
Need to try and find out why I cant get an input oil seal for my steering box. Britpart kit STC889 doesnt fit the oil seal outer is too big (32mm)
What the hell have I got ? Is it possibly a disco 2 box?
Shaft is 22mm the lower part of the hole is 30mm around 6mm to where the circlip goes.
Further up its around 33.5. Should that step be there ? Cant see this config on any photos on google.
Have I put something in the wrong way when rebuilding the box ?
Any suggestions welcome
Thanks
Mark
300tdi
I’m slowly pulling all of my hair out with this one !
Need to try and find out why I cant get an input oil seal for my steering box. Britpart kit STC889 doesnt fit the oil seal outer is too big (32mm)
What the hell have I got ? Is it possibly a disco 2 box?
Shaft is 22mm the lower part of the hole is 30mm around 6mm to where the circlip goes.
Further up its around 33.5. Should that step be there ? Cant see this config on any photos on google.
Have I put something in the wrong way when rebuilding the box ?
Any suggestions welcome
Thanks
Mark
300tdi
