S

scoots

Active Member

• Mar 14, 2021

• #1

Hi folks, after fitting my 2 inch lift and my 265/75/16 insa turbos...I want to give it a slightly wider stance, I did consider spacers but I think I'm gonna buy some new modulars but unsure about which offset to get, can anyone point me in the right direction, thanks

 

kevstar

Well-Known Member

Full Member

• Mar 14, 2021

• #2

-32 offset but you will need extended arches & they will sit flush with them. If they stick out
its an mot fail although they dont seam to bother with that here, could just play dumb.

 

S

scoots

Active Member

• Mar 15, 2021

• #3

Hi kev, thanks for reply..wasnt thinking that wide..dont really wanna cut the arches..is there a smaller minus offset i could use to gain say 40mm

 

Dorsetlanez

Active Member

• Mar 15, 2021

• #4

-32 is the way to go - however there are none in stock anywhere at the moment! only +25mm

 

Dorsetlanez

Active Member

• Mar 16, 2021

• #5

Just one thing if you do go with an offset of 32mm you will need the wheelarch extension kit. Have just had to order this for mine

 

S

scoots

Active Member

• Mar 17, 2021

• #6

Like i said though don't really want to be cutting the arches..especially myself lol

 

Dorsetlanez

Active Member

• Mar 17, 2021

• #7

Im not cutting the arches on mine, just extending them with a set of extended arches. However i do have a winch bumper which sits a lot higher than the the standard bumper - the back arches are fine though.

 

S

scoots

Active Member

• Mar 17, 2021

• #8

I have a winch bumper on mine...it does catch slightly though on articulation on the rear