F

Fearne

New Member
I have a 1990 110 CSW and I'm new to Landys, I'm looking for any advice with the following problem. NS Front wheel is making a grinding noise. Grinding noise seems to be worse when travelling slowly, as speed increases noise drops off. Only thing that springs to mind is brakes possibly binding thats my guess because thats the limit of mechanical knowledge.:confused:

Any Ideas anyone?
 
could be something caught in the wheel/brake or something more serious, where about are you maybe someone could pop round and have a look at it for you
 
Sometimes a small stone or grit drops into the caliper and runs against the disc.lock the steering over and look down beside the disc.Are the pads aok? The metal guard can run on the disc too.I live down along gravel track and remove pebbles often .At worst it could be a wheel bearing
 
Turboman said:
Sometimes a small stone or grit drops into the caliper and runs against the disc.lock the steering over and look down beside the disc.Are the pads aok? The metal guard can run on the disc too.I live down along gravel track and remove pebbles often .At worst it could be a wheel bearing
Click to expand...

or a CVjoint
 
I had similar last week, thought the bearings had gone, but it was the mudguard on inside of hub, which had rusted through and was rubbing against disc on my 110 CSW.
If it's bearings, try www.lrseries.com very good prices.

Could just be the sound of a 1990 Deafener!!!!

Hope this helps.

Jonah
 
Cheers for the suggestions everyone that took time to answer my cry for help. Have been out for a drive today and sods law, did'nt hear a thing, no grinding or anything. Did checkout the the things that were suggested by everyone. Will be in it all weekend so fingers crossed eh.
Thanks all.
G-Man I'm in Basildon
 
Mine did the exact same grinding noise. then started to bang and turned out the cv joint had bust. Check you swivel housings for oil.
 
You must log in or register to reply here.

Similar threads

M
Freelander 1 Advice please
Replies
8
Views
870
pwood999
pwood999
W
Freelander 1 Another rumble, CV joints or IRD?
Replies
0
Views
964
Wonk
W
A
Freelander 1 Yet more noises
Replies
15
Views
2K
Alex1000
A
L
Learning to fix Land Rovers like a pro - career advice wanted
Replies
10
Views
2K
kevstar
kevstar
N
Wheel resistance
2
Replies
39
Views
3K
steve2286w
steve2286w