JordanTeanby123
Member
I need a near side drag link ball joint end for a 1987 defender but can’t seem to find one, could anyone send me a link to one please ?? Tia
300bhp/ton
Well-Known Member
I think you need to brush up on your Google-fu skills. Land Rover parts are easily available from 100’s of retailers. 
Try here: https://www.paddockspares.com/
I know they have what you are after and pictures too.
Btw technically there is no such thing as 1987 Defender...... what you have is a Ninety.
Try here: https://www.paddockspares.com/
I know they have what you are after and pictures too.
Btw technically there is no such thing as 1987 Defender...... what you have is a Ninety.
JordanTeanby123
Member
The problem I was having is they provide so many different item codes for the same item and all say 1990 onwardsI think you need to brush up on your Google-fu skills. Land Rover parts are easily available from 100’s of retailers.
Try here: https://www.paddockspares.com/
I know they have what you are after and pictures too.
Btw technically there is no such thing as 1987 Defender...... what you have is a Ninety.
thankyou for the advice and help much appreciated
300bhp/ton
Well-Known Member
I assume you mean a track rod end for the steering?
They are all essentially the same. But they are handed. This is so you can rotate the track rod/tie bar to lengthen or shorten it in situ. However I can’t tell you which you need as it will depend on which way round the track bar has been fitted.
The different makes are down to quality. Cheap is cheap but usuall wear quicker. Especially if you use it off road.
https://www.paddockspares.com/parts...ver-defender/steering/steering-parts.html?p=2
They are all essentially the same. But they are handed. This is so you can rotate the track rod/tie bar to lengthen or shorten it in situ. However I can’t tell you which you need as it will depend on which way round the track bar has been fitted.
The different makes are down to quality. Cheap is cheap but usuall wear quicker. Especially if you use it off road.
https://www.paddockspares.com/parts...ver-defender/steering/steering-parts.html?p=2
JordanTeanby123
Member
Yeah I do, I took it to famous four for a check over and they gave me a list of things it needed !
That’s spot on it’s just with there being so many I didn’t know what to get, but I’ve bought a pair so either way they should fit but I’m going to replace both anyway at the same time,
Yeah I usually go for mid range as I’ll only being a little bit of off road nothing major
That’s spot on it’s just with there being so many I didn’t know what to get, but I’ve bought a pair so either way they should fit but I’m going to replace both anyway at the same time,
Yeah I usually go for mid range as I’ll only being a little bit of off road nothing major
jamesmartin
Well-Known Member
google rtc5869
jamesmartin
Well-Known Member
there are a few change points but in general you will need pre la.... model year parts there are some minor change points in between for a few parts
JordanTeanby123
Member
Thankyou, I don’t need many more parts as of yet but I’ll keep that in mind and hopefully find what I need
