Hi at the weekend I changed the rear o/s wheel bearing not to much trouble there but found when it was all back together that the ABS HDC & TC Lights were on, also when pulling away I had a clonking noise come from what seems like the N/S rear driveshaft after 2 or 3 clonks it stops and the car drives fine until you turn it of and start again but the lights remain on all the time. The only thing I thought it may be is the sensor that I removed whilst doing the wheel bearing so ordered one and after fitting it still have the same problem. Has anyone any ideas what this could be or point me in the right direction.

The car is a 2004 Freelander TD4 if this helps.

Many thanks in advance.

Do a search on the 3 amigos or three amigos

wot he sed

I've looked them up, all very confusing as I did not have this problem before I changed the bearing. Is the noise from the rear usual on pulling away with this problem because no one else seems to have mentioned it?