An ABS problem with my 1993 Range Rover LSE ( County) following a quick getaway at a slippery junction the other week.
Does the abs ecu store an infinite number of errors (I may be out there with a jumper wire for hours)
Any pointers much appreciated as vehicle is due DOT test this week and I am at my wits end.
- Traction control and ABS warning light on at ignition
- Brakes are working as normal.
- Front left hand sensor was found to be split on one edge causing fault. No sign of copper ring being broken or deformed, wheel rotates freely.Replaced with good sensor fitted per workshop manual instructions.
- At ignition on position traction control light now extinguishes as it should. ABS light remains on - as it should.
- On driving traction control light comes back on along with ABS warning light
- Followed flash code read procedure. Comes up with code 2-9 (not known on any list I can find)
- Followed flash code clear procedure - appears not to clear
- Local garage has tried connecting Rovacom light abs module to check codes, but no comms. (same happens when tried with another LSE in the yard)
Does the abs ecu store an infinite number of errors (I may be out there with a jumper wire for hours)
Any pointers much appreciated as vehicle is due DOT test this week and I am at my wits end.