mickobrien

Active Member

• Mar 21, 2008

• #1

MOrnin All.....

one of the pipes from my abs unit is seeping , when i replace the pipe , will i have to bleed the whole system again , the pipe is only about 12 inch long...
if so how hard is it on a abs car....

ive done non abs loads of times and they were pretty easy.

just want to know what i need to do thats diffrent?

Thanks in advance

Mick

 

mickobrien

Active Member

• Mar 23, 2008

• #2

I cannot beleave nobody on here knows.....

HELP ..............

ta

 

Trewey

Cockernee, Pasty munchin bastid.

• Mar 23, 2008

• #3

ffs
we're not all insomniacs

anyway, with regard to your question....................









I aint got a clue.

 

I

ianda12

Active Member

• Mar 23, 2008

• #4

Not bled the brakes on a Freelander but all the other cars I have done, including ABS work the same way. Bleed from the furthest wheel from the master cylinder first until you get new fluid coming out, and work your way to the nearest. (sometimes helps to have the engine running )

 

Northern Irelander

Well-Known Member

• Mar 23, 2008

• #5

In the FL1 the seq is:
LH front,
RH front,
LH rear,
RH rear,
Get yourself a one-man bleed kit if you are tackling it on your todd. Esp if it's the early hours of the morning job for insomniacs

 

mickobrien

Active Member

• Mar 24, 2008

• #6

Marvelous...... cheers gents....

3am and wide a bloody wake....

thanks again.
mick