L

landyman2005

New Member

• Dec 14, 2011

• #1

how long should the glow plug light stay on in a L-series diesel? mines on for 3 secs but if i test the plug on the bench it takes 13-15sec to glow.

i'm struggling to start it from cold in the mornings or if left for more than a few hours, i tried priming it this morning by squeezing the bulb till it went hard, made no difference? also should the bulb stay hard like it does on my boat? the one under the bonnet goes soft/empty in maybe 30sec with the engine not running

 

L

landyman2005

New Member

• Dec 16, 2011

• #2

anyone fancy timing how long their glow plug light stays on?? pleease!!!

 

Bromsgrove Defender

Well-Known Member

• Dec 16, 2011

• #3

landyman2005 said:

anyone fancy timing how long their glow plug light stays on?? pleease!!!

Click to expand...

Errm how long was that piece of string again??

 

Beneagles

Well-Known Member

Full Member

• Dec 16, 2011

• #4

Bromsgrove Defender said:

Errm how long was that piece of string again??

Click to expand...

Twice the length of the circumference of the best tyre ever made for the widest range of landy applications.

 

OldIrishWulf

Well-Known Member

• Dec 16, 2011

• #5

Should glow instantly .1-2 seconds .Yours are ff knackered .

 

Bromsgrove Defender

Well-Known Member

• Dec 16, 2011

• #6

Beneagles said:

Twice the length of the circumference of the best tyre ever made for the widest range of landy applications.

Click to expand...

Ah yep that's the one cheers Ben

 

Bromsgrove Defender

Well-Known Member

• Dec 16, 2011

• #7

OldIrishWulf said:

Should glow instantly .1-2 seconds .Yours are ff knackered .

Click to expand...

Thought the question was how long should they stay on for?

Which obviously is dependant on the temperature

 

newcyboots

New Member

• Dec 16, 2011

• #8

Never timed mine, but even on the coldest mornings, my glow plug light is out before my SRS light.. and then starts instantly with no problems.. When warm, its only on for a second at most...

 

L

landyman2005

New Member

• Dec 16, 2011

• #9

hmmm mine is always 3secs whatever the temperature.... i put 3 new ones in only trouble is they were britpart....:doh: any reccomendations for a proper makes of glowplugs??

 

OldIrishWulf

Well-Known Member

• Dec 16, 2011

• #10

Ask your local motor factor .Be nice and ask for a trade price ,you will be back there very often .

edit :I just goooogle earthed Clifden .Seems your a bit far from anywhere .I like it .

 

Last edited: Dec 16, 2011

Chaser

New Member

• Dec 16, 2011

• #11

landyman2005 said:

hmmm mine is always 3secs whatever the temperature.... i put 3 new ones in only trouble is they were britpart....:doh: any reccomendations for a proper makes of glowplugs??

Click to expand...

4.5secs @ 0degC

Given what you say it might be worth changing the ETC sensor as this controls glow duration and influences injection timing. If that makes no difference then check and adjust cam and FIP belts/timing.

 

L

landyman2005

New Member

• Dec 16, 2011

• #12

OldIrishWulf said:

Ask your local motor factor .Be nice and ask for a trade price ,you will be back there very often .

edit :I just goooogle earthed Clifden .Seems your a bit far from anywhere .I like it .

Click to expand...

its a bit remote sometimes! there is a motor factors, although unless it has massey written on it he doesnt understand!!