just like to take this oportunity to say hello.
my name is Ian I'm from Leeds and have recently purchased a 300tdi 3 dr disco, as usual in need of major welding.
I've had a series 3 SWB station wagon, a 200tdi disco & a 300 tdi disco in this past but because of relationship break-up had to part with the 300tdi.
Well the good news is I'm now in a position to give a disco a new home and a new lease of life.
I'm a HGV fitter by trade with considerable plating and welding experience so am not phased by the work to be done.
I intend to raise the disco by 2" and would like to alter the camber myself with some spare hockey sticks i have. If any1 has any information on how to alter the hockey sticks (apart from putting castor correction bushes in) I would be grateful of the advise.
I know you need to change the angle by 3 degrees but which way and is that at both ends. I have all the equip to attempt this at work so would like to give it a go.
cheers and once again hello
my name is Ian I'm from Leeds and have recently purchased a 300tdi 3 dr disco, as usual in need of major welding.
I've had a series 3 SWB station wagon, a 200tdi disco & a 300 tdi disco in this past but because of relationship break-up had to part with the 300tdi.
Well the good news is I'm now in a position to give a disco a new home and a new lease of life.
I'm a HGV fitter by trade with considerable plating and welding experience so am not phased by the work to be done.
I intend to raise the disco by 2" and would like to alter the camber myself with some spare hockey sticks i have. If any1 has any information on how to alter the hockey sticks (apart from putting castor correction bushes in) I would be grateful of the advise.
I know you need to change the angle by 3 degrees but which way and is that at both ends. I have all the equip to attempt this at work so would like to give it a go.
cheers and once again hello
